Finally a motor controller that can operate our larger motors at their full potential! Perfect match for the larger 8057,12030,12060 and 18030 motors!
Running a 180 MHz 32-Bit processor these will deliver maximum smoothness, unmatched linearity, with ultra-fast throttle response for unsurpassed flight control. With peak power ratings up to 30kWs, these ESCs will have no trouble powering your craft.
The APD developed (proprietary) firmware ensures unmatched low-throttle and starting characteristics. Ultra-smooth starting and ramp-up characteristics ensure your drive-train is safe. Features include PWM-frequency dithering to avoid PWM-commutation synchronisation, adaptive motor timing advance and proprietary developed Active Phase-Current De-magnetisation (APCD). APCD along with Synchronous rectification ensure maximum ESC efficiency is achieved.
Designed and manufactured in Australia using only the highest quality components, ensuring no sacrifice in reliability.
Aerospace grade ceramic capacitor bank for lowest possible ESR and maximum reliability, no more dried up electrolytic failures!
Multiple operation modes:
Normal:
Normally used for watercraft and aircraft not requiring reverse.
Incremental + Linear power ramp control.
Multirotor:
Instantaneous input = Output Step Response.
Heli:
Soft-start for drivetrain protection.
Traction:
Same as normal except for active torque control, which applies a motor phase current limit that ramps proportionally with higher motor duty-cycles.
Plug and play firmware
True 12bit throttle resolution
Feed-Forward compensator
Up to 480Hz input update rate (Standard PWM)
Runs Oneshot125, Mutishot and Proshot Up to 32Khz
Over 1,000,000 eRPM
Auto PWM-freq
Auto Timing Advance
Onboard 16Mbit Flash memory – Data-logging
Firmware updatable through micro-USB port
Isolated Input and output (Can be configured for RPM)
Fully configurable through the APD ESC Config Tool (micro-USB Connection)
Optional external capacitor board for >1m input lead lengths: Cap Board
* Continuous current ratings are at a 100% throttle duty cycle. Continuous rating is defined as max sustained current at 100% throttle for 180 seconds with 10 m/s airflow.
Weight 1100 grams
Size: UHV 180 mm(L) x 100 mm(W) x 28 mm(H)
Optical isolation
UHV 20S(85 volts) 400 amps constant, 450 amps surge
HV Pro 28S(120 volts) 300 amps constant, 450 amps surge
Documentation and Datasheets can be found here:
https://docs.powerdrives.net/products/hv_pro/overview
https://docs.powerdrives.net/products/hv_pro/quick-start-guide
https://docs.powerdrives.net/products/hv_pro/configuration
https://docs.powerdrives.net/products/hv_pro/advanced-setup
https://docs.powerdrives.net/products/hv_pro/troubleshooting
https://docs.powerdrives.net/products/hv_pro/datasheets
